Wet mesa etching process in InGaN-based light emitting diodes

Chung Chieh Yang*, Chia Feng Lin, Ren Hao Jiang, Hsun Chih Liu, Chun Min Lin, Chung Ying Chang, Dong Sing Wuu, Hao-Chung Kuo, Shing Chung Wang

*Corresponding author for this work

研究成果: Article

4 引文 斯高帕斯(Scopus)

摘要

A photoelectrochemical wet mesa etching (WME) process was used to fabricate InGaN-based light emitting diodes (LEDs) as a substitute for the conventional plasma mesa dry etching process. The p-type GaN:Mg layer, InGaN active layer, and n-type GaN:Si layer were etched through a sequential photoelectrochemical oxidation and oxide-removing process to define the mesa region. The higher lateral wet-etching rate (∼3.4 μmh) of the InGaN active layer was observed to form a wider undercut structure which has 42.7% light output power enhancement compared to a conventional LED fabricated with the plasma dry etching process. The reverse current of a WME-LED was suppressed by avoiding plasma damage during the dry mesa etching process.

原文English
期刊Electrochemical and Solid-State Letters
11
發行號7
DOIs
出版狀態Published - 26 五月 2008

指紋 深入研究「Wet mesa etching process in InGaN-based light emitting diodes」主題。共同形成了獨特的指紋。

引用此