Performance comparison of p-side-up thin-film AlGaInP light emitting diodes with aluminumdoped zinc oxide and indium tin oxide transparent conductive layers

Ming Chun Tseng, Dong Sing Wuu, Chi Lu Chen, Hsin Ying Lee, Yu Chang Lin, Ray-Hua Horng*

*Corresponding author for this work

研究成果: Article同行評審

10 引文 斯高帕斯(Scopus)

摘要

Transparent conductive layers (TCLs) deposited on a GaP window layer were used to fabricate high-brightness p-side-up thin-film AlGaInP light-emitting diodes (LEDs) by the twice wafer-transfer technique. Indium tin oxide (ITO) and aluminum-doped zinc oxide (AZO) were used as TCLs for comparison. The TCLs improved droop of external quantum efficiencies (EQE) of LEDs and junction temperature, which result in increasing the light output power and thermal stability of the LEDs. The droop efficiency of Ref-LED, ITO-LED and AZO-LED were 64%, 27% and 15%, respectively. The junction temperature of ITO-LED and AZO-LED reduced to 49.3 and 39.6 °C at an injection current of 700 mA compared with that (80.8 °C) of Ref-LED. The LEDs with AZO layers exhibited the most excellent LED performance. The emission wavelength shifts of LEDs without a TCL, with an ITO layer, and with an AZO layer were 17, 8, and 3 nm, respectively, when the injection current was increased from 20 to 1000 mA. The above results are promising for the development of AZO thin films to replace ITO thin films for AlGaInP LED applications.

原文English
頁(從 - 到)1349-1357
頁數9
期刊Optical Materials Express
6
發行號4
DOIs
出版狀態Published - 1 四月 2016

指紋 深入研究「Performance comparison of p-side-up thin-film AlGaInP light emitting diodes with aluminumdoped zinc oxide and indium tin oxide transparent conductive layers」主題。共同形成了獨特的指紋。

引用此