Luminescence material characterizations on laser-phosphor lighting techniques

Chih Ting Yeh, Yen I. Chou, Kai Shing Yang, Shih Kuo Wu, Chi-Chuan Wang*

*Corresponding author for this work

研究成果: Article同行評審

7 引文 斯高帕斯(Scopus)

摘要

This study examines three different types of laser carriers, including the phosphors in silicone (PiS), the phosphor in glass (PiG), and alumina-based ceramic binders (CP), for laser-phosphor lighting characterizations via a laser projector light source module. The thermal influence of heat spreading on these phosphor materials and their luminescence performance is also investigated. The conversion efficiency of PiS, PiG and CP was found to be 29.7%, 34.6% and 31.8%, with their corresponding maximum laser power operations of 3.9 W, 7.9 W, and 17.2 W, respectively. This work further correlates the maximum laser operation power with the thermal conductivity of luminescence material. From the optical engine perspective, it was found that CP exhibits the superior thermal conductivity of 17.0 W/mK for slight hot-spot IR observation and higher laser power operation. This work finally delivers a CP device for 50.2W maximum laser operation with the operating temperature below 100 °C. The simulation is also carried out in order to examine spreading resistance’s influence, when subject to convective boundary condition. CP’s response sensitivity to heat transfer coefficient was found to be rather small.

原文English
頁(從 - 到)7226-7236
頁數11
期刊Optics Express
27
發行號5
DOIs
出版狀態Published - 1 一月 2019

指紋 深入研究「Luminescence material characterizations on laser-phosphor lighting techniques」主題。共同形成了獨特的指紋。

引用此