Improvement in the extraction efficiency of AlGaInP and GaN thin film LEDs via surface roughening

Y. J. Lee*, Hao-Chung Kuo, Tien-chang Lu, H. W. Huang, S. C. Wang, C. F. Lin

*Corresponding author for this work

研究成果: Conference article同行評審

摘要

In the first part of this paper, we present a LED structure adopting double diffused-surfaces on-top transmitted diffuse surface and another diffuse omnidirectional reflector surface on the bottom of LED chip. According to this design, guided light scattered by bottom diffuse omnidirectional reflectors can be again scattered toward to angles inside the escape cone by top diffuse transmittance surfaces. High light external efficiency (∼ 40%) was achieved on this novel structure. This high efficiency could be attributed to the strong scattering efficiency of using double diffuse surfaces, further reducing trapping of light within LED chips. In the second part, we present n-side-up AlGaInP-based LEDs with a triangle-like surface morphology using the adhesive layer bonding technique, followed by wet etching to roughen the surface. The novel AlGaInP LED design could not only reduce internal reflection between rear mirror systems and the semiconductor/air interface, but also to effectively scatter light outside LED devices. copyright The Electrochemical Society.

原文English
頁(從 - 到)199-211
頁數13
期刊ECS Transactions
3
發行號5
DOIs
出版狀態Published - 1 十二月 2006
事件State-of-the-Art Program on Compound Semiconductors 45 (SOTAPOCS 45) -and- Wide Bandgap Semiconductor Materials and Devices 7 - 210th Electrochemical Society Meeting - Cancun, Mexico
持續時間: 29 十月 20063 十一月 2006

指紋 深入研究「Improvement in the extraction efficiency of AlGaInP and GaN thin film LEDs via surface roughening」主題。共同形成了獨特的指紋。

引用此