Electroplating process of Ni-CNTS nanocomposite for MEMS resonator fabrication

Yi Chia Lee*, Yu-Ting Cheng, Wen-Syang Hsu

*Corresponding author for this work

研究成果: Conference contribution同行評審

摘要

The paper presents an electroplating process for Ni-Carbon Nanotubes (CNTs) nanocomposite micro-resonator (or μ-resonator) fabrication. Two kinds of chemical treatments, H2SO4/H2O2 and Sodium dodecyl sulfate (SDS) have been utilized for the surface modification of CNTs, respectively. The resonant frequency and Q factor of the SDS treated Ni-CNTs nanocomposite resonators are 30.65 kHz and 221, respectively. The values are higher than that of the one made of pure Ni and the H2SO 4/H2O2 mixture treated Ni-CNTs nanocomposite. They are 29.35 kHz, 190, and 30.35 kHz, 198, respectively. The experimental results indicate a better dispersion treatment on the CNTs in an electroplating bath could result in more incorporated CNTs in the Ni matrix and exhibit better improvement of device performance.

原文English
主出版物標題2011 IEEE 24th International Conference on Micro Electro Mechanical Systems, MEMS 2011
頁面416-419
頁數4
DOIs
出版狀態Published - 13 四月 2011
事件24th IEEE International Conference on Micro Electro Mechanical Systems, MEMS 2011 - Cancun, Mexico
持續時間: 23 一月 201127 一月 2011

出版系列

名字Proceedings of the IEEE International Conference on Micro Electro Mechanical Systems (MEMS)
ISSN(列印)1084-6999

Conference

Conference24th IEEE International Conference on Micro Electro Mechanical Systems, MEMS 2011
國家Mexico
城市Cancun
期間23/01/1127/01/11

指紋 深入研究「Electroplating process of Ni-CNTS nanocomposite for MEMS resonator fabrication」主題。共同形成了獨特的指紋。

引用此