Dynamic analysis of a micro drilling system by the modified transfer matrix method

An-Chen Lee*, Danh Tuyen Nguyen

*Corresponding author for this work

研究成果: Conference article同行評審

1 引文 斯高帕斯(Scopus)

摘要

Normally, breakage is the main cause of failure of a micro drilling system, of which coupling effect of lateral and torsional displacements plays the most important role. This research developed a modified transfer matrix method to investigate the dynamics of a micro drilling system focusing on displacements induced by not only lateral, shear, torsional deformations, but also the coupling effect between lateral and torsional vibrations. The micro drilling system is modeled as pre-twisted rotating Timoshenko beam elements with a continuous-system concept. Each element includes components of linear bearings, axial drilling force, gyroscopic moments, and eccentricity. The overall transfer matrix of the system is developed to determine the state vector of the system including displacements and forces. Finally, a numerical example was presented, where the lateral and torsional displacements and critical speed of the micro drilling system at the micro drill's tip were presented.

原文English
文章編號01024
期刊MATEC Web of Conferences
61
DOIs
出版狀態Published - 28 六月 2016
事件International Seminar on Applied Physics, Optoelectronics and Photonics, APOP 2016 - Shanghai, China
持續時間: 28 五月 201629 五月 2016

指紋 深入研究「Dynamic analysis of a micro drilling system by the modified transfer matrix method」主題。共同形成了獨特的指紋。

引用此