Design optimization of a 1.4 GHz low power bulk-driven mixer

Chun Hsing Li*, Chien-Nan Kuo

*Corresponding author for this work

研究成果: Conference contribution同行評審

2 引文 斯高帕斯(Scopus)

摘要

This work presents a design and analysis of a bulk-driven mixer using variant Volterra series approach. Topologies of the bulk-driven mixer (BDM) with and without a current source have been investigated. The analysis shows that the LO voltage swing has a limit in the BDM with a current source due to turn-on of the bulk-to-source diode. The operational principle of the BDM without a current source is discussed and indicates that it shall be characterized in terms of weakly nonlinear operation. With the insight gained from the nonlinear analysis, the proposed BDM is designed and implemented in 0.18-um CMOS technology. The measurement result shows that the voltage conversion gain, SSB noise figure, and IIP3 are 16 dB, 19.65 dB, and 0.5 dBm, respectively. The power consumption is only 0.25 mW from a supply voltage of 1 V.

原文English
主出版物標題2010 Asia-Pacific Microwave Conference Proceedings, APMC 2010
頁面1035-1038
頁數4
出版狀態Published - 1 十二月 2010
事件2010 Asia-Pacific Microwave Conference, APMC 2010 - Yokohama, Japan
持續時間: 7 十二月 201010 十二月 2010

出版系列

名字Asia-Pacific Microwave Conference Proceedings, APMC

Conference

Conference2010 Asia-Pacific Microwave Conference, APMC 2010
國家Japan
城市Yokohama
期間7/12/1010/12/10

指紋 深入研究「Design optimization of a 1.4 GHz low power bulk-driven mixer」主題。共同形成了獨特的指紋。

引用此