Characterization of titanium nitride etch rate and selectivity to silicon dioxide in a Cl2 helicon-wave plasma

H. K. Chiu*, T. L. Lin, Y. Hu, K. C. Leou, Horng-Chih Lin, M. S. Tsai, T. Y. Huang

*Corresponding author for this work

研究成果: Article同行評審

15 引文 斯高帕斯(Scopus)

摘要

The etch rates of TiN and SiO2 and TiN/SiO2 selectivity as a function of Cl2 and N2 flow rate, bias power, and pressure were studied. The bias power affected the etch rate and the selectivity between TiN and SiO2 can be achieved at low bias power. The etch rate increased with increasing pressure while the etch selectivity decreased as the pressure increased. This may be due to the atomic Cl radical density, the ion flux and the ion energy. Chlorine and nitrogen flow rate have no significant effect on etch selectivity and etch rate, respectively.

原文English
頁(從 - 到)455-459
頁數5
期刊Journal of Vacuum Science and Technology, Part A: Vacuum, Surfaces and Films
19
發行號2
DOIs
出版狀態Published - 1 三月 2001

指紋 深入研究「Characterization of titanium nitride etch rate and selectivity to silicon dioxide in a Cl<sub>2</sub> helicon-wave plasma」主題。共同形成了獨特的指紋。

引用此