Channel orientation effect on endwall heat transfer in rotating cooling passages with pin-fins

Szu Chi Huang, Chen Chih Wang, Yao-Hsien Liu*

*Corresponding author for this work

研究成果: Article同行評審

3 引文 斯高帕斯(Scopus)

摘要

Heat transfer was experimentally measured using a rotating pin-fin channel involving two channel orientations, namely 90° and 150° with respect to a rotating axis. A rectangular channel with an aspect ratio of 4:1 was selected to study internal cooling near the trailing edge of a turbine blade. A newly developed method of liquid crystal thermography along with stroboscopic photography was used to obtain detailed heat transfer contours on an endwall surface. The pin-fin arrays were designed in either inline or staggered patterns, and the Reynolds number ranged from 5,000 to 20,000. The pressurized air flow acted as the working fluid, and the highest rotation number was thus 0.39. The influence of rotation was greater on the inline array than on the staggered array, engendering higher heat transfer enhancement on the leading and trailing surfaces. Compared with the other orientation, the inclined orientation (150°) engendered a larger spanwise heat transfer variation because of the shifted rotation-induced secondary flows. The inline array exhibited the highest rotation-induced heat transfer enhancement at the 90° orientation, and the highest enhancement levels were 90% and 40% on the trailing and leading surfaces, respectively.

原文English
頁(從 - 到)1115-1126
頁數12
期刊International Journal of Heat and Mass Transfer
136
DOIs
出版狀態Published - 1 六月 2019

指紋 深入研究「Channel orientation effect on endwall heat transfer in rotating cooling passages with pin-fins」主題。共同形成了獨特的指紋。

引用此