A three-dimensional numerical investigation of the airside performance of fin-and-tube heat exchangers having round and oval configurations is presented in this paper. For louver fin geometry at a fixed louver length, a 10% decrease in heat transfer performance is observed and a 41% decrease of pressure drop is seen for the oval tube configuration. For the plain fin configuration and Vfr < 2 m/s (6.56 ft/s), the heat transfer performance for an oval tube is slightly higher than that of a round tube. However, the heat transfer performance is reversed when Vfr > 2 m/s (6.56 ft/s). The pressure drop for plain fin and oval tubes shows 100% lower pressure drop when compared to the round tube configuration.
|出版狀態||Published - 1 十二月 2000|
|事件||2000 Annual Meeting of the American Society of Heating, Refrigerating and Air-Conditioning Engineerings, INC - Minneapolis, MN, USA|
持續時間: 25 六月 2000 → 28 六月 2000