Stimulus driver for epilepsy seizure suppression with adaptive loading impedance

Ming-Dou Ker*, Chun Yu Lin, Wei Ling Chen

*Corresponding author for this work

Research output: Contribution to journalArticle

7 Scopus citations

Abstract

A stimulus driver circuit for a micro-stimulator used in an implantable device is presented in this paper. For epileptic seizure control, the target of the driver was to output 30 νA stimulus currents when the electrode impedance varied between 20 and 200 kΩ. The driver, which consisted of the output stage, control block and adaptor, was integrated in a single chip. The averaged power consumption of the stimulus driver was 0.24-0.56 mW at 800 Hz stimulation rate. Fabricated in a 0.35 νm 3.3 V/24 V CMOS process and applied to a closed-loop epileptic seizure monitoring and controlling system, the proposed design has been successfully verified in the experimental results of Long-Evans rats with epileptic seizures.

Original languageEnglish
Article number066008
JournalJournal of Neural Engineering
Volume8
Issue number6
DOIs
StatePublished - 1 Dec 2011

Fingerprint Dive into the research topics of 'Stimulus driver for epilepsy seizure suppression with adaptive loading impedance'. Together they form a unique fingerprint.

  • Cite this