Nanomechanical properties and fracture behaviors of Ba1-xKxCe0.6Zr0.2Y0.2O3-δ electrolytes by nanoindentation

Sheng Rui Jian*, Sheng Wei Lee, Jeng-Kuei Chang, Chung Jen Tseng, Jenh-Yih Juang

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

3 Scopus citations

Abstract

The nanomechanical characteristics and fracture behaviors of the Ba1-xKxCe0.6Zr0.2Y0.2O3-δ (K-doped BCZY, 0.0 ≤ x ≤ 0.15) oxides were investigated by using nanoindentation techniques. The BKCZY samples were prepared by the citrate-ethylenediaminetetraacetic acid (EDTA) complexing sol-gel process, followed by uniaxial pressure pressing and sintering at 1600 °C for 4 h. The XRD results indicated that the BKCZY samples occurred predominantly in perovskite-type cubic structures. The hardness and Young's modulus of BKCZY samples were measured by a Berkovich nanoindenter operated in continuous contact stiffness measurements (CSM) mode. Results indicated that the hardness and Young's modulus of BKCZY sample decreased substantially with increasing the K doping concentration, presumably due to doping-enhanced grain growth. Furthermore, the SEM observations indicated that Berkovich nanoindentation-induced fracture mode was mostly transgranular and the fracture toughness exhibited a similar doping dependence as that of the hardness and Young's modulus.

Original languageEnglish
Pages (from-to)1691-1696
Number of pages6
JournalScience of Advanced Materials
Volume6
Issue number8
DOIs
StatePublished - 1 Jan 2014

Keywords

  • Fracture toughness
  • Hardness
  • Nanoindentation
  • Scanning electron microscopy
  • Solid oxide fuel cells
  • X-ray diffraction

Fingerprint Dive into the research topics of 'Nanomechanical properties and fracture behaviors of Ba<sub>1-x</sub>K<sub>x</sub>Ce<sub>0.6</sub>Zr<sub>0.2</sub>Y<sub>0.2</sub>O<sub>3-δ</sub> electrolytes by nanoindentation'. Together they form a unique fingerprint.

Cite this