Dynamic modeling and controller design for a single-stage single-switch parallel boost-flyback-flyback converter

Heng Yi Li*, Hung-Chi Chen

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

25 Scopus citations

Abstract

In general, partial power of the parallel ac/dc converter is processed only once and transferred directly. In order to keep the output voltage constant, the switching duty ratio in the parallel converter must vary with the line phase. It means that the operating point of the parallel ac/dc converter changes with the variation of input voltage, which would be a challenge for controller design. In this paper, the dynamic modeling of a single-stage single-switch parallel boost-flyback-flyback converter is developed by the linearization of its large-signal equations. To overcome the modeling uncertainty due to the variation of operating point, the feedback controller is designed based on the boundary of the mode to obtain zero steady-state error, fast rise time, and heavily damping within input voltage range. Both the derived dynamic modeling and the designed voltage controller are demonstrated by the provided simulation and experiment results.

Original languageEnglish
Article number5659909
Pages (from-to)816-827
Number of pages12
JournalIEEE Transactions on Power Electronics
Volume27
Issue number2
DOIs
StatePublished - 16 Jan 2012

Keywords

  • Average model
  • dynamic model
  • power factor correction
  • single-stage

Fingerprint Dive into the research topics of 'Dynamic modeling and controller design for a single-stage single-switch parallel boost-flyback-flyback converter'. Together they form a unique fingerprint.

Cite this