Cascode feedback amplifier combined with resonant matching for UWB system

Pei Zong Rao, Yuh-Chuan Cheng, Ching-Piau Liang, Shyh-Jong Chung

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

This paper shows the design of a broadband single-end low noise amplifier for UWB system with TSMC 0.18 mu m. CMOS processes. The proposed amplifier achieves broadband input matching by cascode feedback topology with parallel resonate cavity and the bandwidth is from 3.1 GHz to 10.1 GHz. The simulation results are as follows: 12 I dB of gain, the input/output return loss are greater than 10 dB, minimum noise figure is about 3.3 dB, and 1 dB gain compression point is about -15 dBm. The total current consumption included bias network is 9.1 mA under a 1.8 V single supply voltage. Chip area is 0.8 nun x 0.8 mm.
Original languageEnglish
Title of host publicationProgress in Electromagnetics Research Symposium (PIERS 2007)
PublisherIEEE
Pages946-948
Number of pages3
StatePublished - 2007

Fingerprint Dive into the research topics of 'Cascode feedback amplifier combined with resonant matching for UWB system'. Together they form a unique fingerprint.

  • Cite this

    Rao, P. Z., Cheng, Y-C., Liang, C-P., & Chung, S-J. (2007). Cascode feedback amplifier combined with resonant matching for UWB system. In Progress in Electromagnetics Research Symposium (PIERS 2007) (pp. 946-948). IEEE.