Bending tests for the structural safety assessment of space truss members

Marco Bonopera*, Kuo Chun Chang, Chun Chung Chen, Tzu-Kang Lin, Nerio Tullini

*Corresponding author for this work

Research output: Contribution to journalReview article

2 Scopus citations

Abstract

This article compares two nondestructive static methods used for the axial load assessment in prismatic beam-columns of space trusses. Examples include the struts and ties or the tension chords and diagonal braces of steel pipe racks or roof trusses. The first method requires knowledge of the beam-column’s flexural rigidity under investigation, whereas the second requires knowledge of the corresponding Euler buckling load. In both procedures, short-term flexural displacements must be measured at the given cross sections along the beam-column under examination and subjected to an additional transverse load. The proposed methods were verified by numerical and laboratory tests on beams of a small-scale space truss prototype made from aluminum alloy and rigid connections. In general, if the higher second-order effects are induced during testing and the corresponding total displacements are accurately measured, it would be easy to obtain tensile and compressive force estimations.

Original languageEnglish
Pages (from-to)138-149
Number of pages12
JournalInternational Journal of Space Structures
Volume33
Issue number3-4
DOIs
StatePublished - 1 Jan 2018

Keywords

  • Force identification
  • Inverse problem
  • Second-order theory
  • Space truss
  • Static test

Fingerprint Dive into the research topics of 'Bending tests for the structural safety assessment of space truss members'. Together they form a unique fingerprint.

  • Cite this