Analysis and design of bandpass single-pole-double-throw FET filter-integrated switches

Zuo-Min Tsai *, Yu Sian Jiang, Jeffrey Lee, Kun You Lin, Huei Wang

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

41 Scopus citations

Abstract

This paper proposes a method to integrate a single-pole-double-throw (SPDT) switch and a quarter-wavelength bandpass filter. A 1-GHz SPDT hybrid switch and a 60-GHz pseudomorphic HEMT monolithic-microwave integrated-circuit SPDT switch with 30% fractional bandwidth are demonstrated. The 1-GHz SPDT switch achieves 1.5-dB insertion loss and 20-dB isolation at center frequency. For the 60-GHz SPDT switch, the measured insertion loss is lower than 2.5 dB and the isolation is higher than 27 dB. The low insertion loss and high isolation show that no performance is degraded when integrating the filter function. The analysis of the power performance is also described. Using the device dc-IV curves, the power compression point can be predicted.

Original languageEnglish
Pages (from-to)1601-1610
Number of pages10
JournalIEEE Transactions on Microwave Theory and Techniques
Volume55
Issue number8
DOIs
StatePublished - 1 Aug 2007

Keywords

  • Bandpass filter
  • Monolithic microwave integrated circuit (MMIC)
  • Power compression point
  • Single-pole double-throw (SPDT)

Fingerprint Dive into the research topics of 'Analysis and design of bandpass single-pole-double-throw FET filter-integrated switches'. Together they form a unique fingerprint.

Cite this