An active guarding circuit design for wideband substrate noise suppression

Hao Ming Chao*, Wen Shen Wuen, Kuei-Ann Wen

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

7 Scopus citations

Abstract

In this paper, an active guarding circuit is presented for wideband substrate noise suppression. A feed-forward compensation mechanism is proposed to extend the noise suppression bandwidth and to adjust the amplitude of phase-inversed noise cancellation current by introducing a zero and an amplitude controller. A noise decoupling mechanism is developed to provide a decoupling path and to sense the noise level for generating noise cancellation current. With substrate characterization, parameters of substrate network impedance, decoupling factor, and amplitude of noise cancellation current can be either obtained or determined. The active guarding circuit is implemented in a 90-nm CMOS process based on substrate characterization. The measured substrate noise suppression is better than -9 dB from dc to 250 MHz. The -3-dB suppression bandwidth is effectively extended to 1.2 GHz. The power consumption and circuit area are 2.5 mW and 20 μm × 41 μm, respectively.

Original languageEnglish
Article number4655627
Pages (from-to)2609-2619
Number of pages11
JournalIEEE Transactions on Microwave Theory and Techniques
Volume56
Issue number11
DOIs
StatePublished - 1 Nov 2008

Keywords

  • Analog circuits
  • CMOS integrated circuits (ICs)
  • Substrate coupling noise
  • Substrate crosstalk
  • Substrate isolation

Fingerprint Dive into the research topics of 'An active guarding circuit design for wideband substrate noise suppression'. Together they form a unique fingerprint.

Cite this